View HSMC-A430-W50M1_1086595.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HSMx-A43x-xxxxx
Surface Mount LED Indicator
Data Sheet
Description
The Power PLCC-4 SMT LED with Lens are high-performance PLCC-4 package size SMT LEDs targeted mainly in Automotive & Electronics Signs and Signals (ESS) markets. These top-mount single-chip packages with focused radiation offer high brightness in beam direction and are excellent for interior automotive, indoor and outdoor sign and industrial applications. With additional lens in 30 variants, these products are especially fitting to applications for traffic lights, CHMSL and displays. The PLCC-4 package family is able to dissipate heat better compared to the PLCC-2 packages. In proportion to this increase in driving current, this family of LEDs is able to produce higher light output compared to the conventional PLCC-2 SMT LEDs. As an extension of the standard flat top PLCC-4 SMT LEDs, the Power PLCC-4 with Lens device is able to provide focused beams within narrow viewing angles (30) meeting the market's requirements for focused radiation and high brightness in beam directions. The Power PLCC-4 SMT LED with 30 is ideal for panel, push button, or general backlighting in automotive interior & exterior, sign, office equipment, industrial equipment and home appliances applications. This package design coupled with careful selection of component materials allow the Power PLCC-4 SMT LED with Lens to perform with higher reliability in a larger temperature range -40C to 100C. This high reliability feature is crucial to allow the Power PLCC-4 SMT LED with Lens to do well in harsh environments such as its target Automotive & ESS markets. The Power PLCC4 SMT LED with Lens package is also designed to be compatible with both IR-solder re-flow and throughthe-wave soldering.
Features
* Industry Standard PLCC-4 * High reliability LED package * High brightness using AllnGaP and InGaN dice technologies * High optical efficiency * Narrow Viewing angle at 30 * Available in 8mm carrier tape on 7-inch reel * Compatible with both IR and TTW soldering process
Applications Interior automotive
* * * * * * * * * * Instrument panel backlighting Central console backlighting Cabin backlighting Navigation and audio system Dome lighting Push button backlighting Turn signals CHMSL Rear Combination Lamp Side repeaters
Exterior automotive
Electronic signs and signals
* Interior and exterior full color sign * Variable message sign * Garden lighting
Office automation, home appliances, industrial equipment
* Front panel backlighting * Push button backlighting * Display backlighting
CAUTION: HSMN, HSMM-A43x-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details.
The new Avago Technologies Power PLCC-4 SMT LED with 30 Lens will carry the part number HSMx- A43xxxxxx. The high brightness AlInGaP and InGaN dice technologies utilized will provide the product brightness that meets the Automotive and ESS markets requirements. The Lens package will complement and complete the existing AlInGap & InGaN color standard Power-PLCC-4 LED that Avago Technologies offers, providing customers an extra Lens option from one supplier. To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin (except for red color), to provide close uniformity
Package Dimensions
Note: All dimensions in mm Electrical connection between all cathodes is recommended
2
Device Selection Guide
Color Red Red Orange Part Number HSMC-A430-W50M1 HSMC-A431-X90M1 HSMJ-A430-W50M1 HSMJ-A431-X90M1 HSMV-A430-Y90M1 Orange Amber HSML-A431-X90M1 HSMA-A430-W90M1 HSMA-A431-Y00M1 HSMA-A431-X90M1 Green Blue HSMM-A430-W90M2 HSMN-A430-U50M2 HSMN-A431-T50M2 Min. IV (mcd) 1125.00 2240.00 1125.00 2240.00 3500.00 2240.00 1400.00 2850.00 2240.00 1400.00 450.00 285.00 Typ. IV (mcd) 2300.00 4000.00 2300.00 4500.00 6000.00 4500.00 3000.00 5000.00 4700.00 2400.00 950.00 360.00 Max. IV (mcd) 3550.00 7150.00 3550.00 7150.00 11250.00 7150.00 4500.00 7150.00 4500.00 1400.00 900.00 Test Current (mA) 50 50 50 50 50 50 50 50 50 30 30 30 Dice Technology AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP InGaN InGaN InGaN
Notes: 1. The luminous intensity IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. Iv tolerance 12%
Part Numbering System
HSM x1 - A X2 X3 X4 - X5 X6 X7 X8 X9 Packaging Option Colot Bin Selection Intensity Bin Select Device Specific Configuration Package Type LED Chip Color
Absolute Maximum Ratings (TA=25C)
Parameters DC Forward Current [1] Peak Forward Current [2] Power Dissipation Reverse Voltage Junction Temperature Operating Temperature Storage Temperature HSMC/A 70 mA 200 mA 180 mW 5V 110 C - 40 C to + 100 C - 40 C to + 100 C HSMV 70 mA 200 mA 240 mW 5V HSMM/N 30 mA 90 mA 114 mW 4V
Notes: 1. Derate linearly as shown in Figure 4. 2. Duty factor = 10%, Frequency = 1kHz
3
Optical Characteristics (TA = 25 C)
Peak Wavelength PEAK (nm) Typical 635 621 623 609 592 518 468 Dominant Wavelength D[1] (nm) Typical 626 615 617 605 590 525 470 Viewing Angle 21/2 [2] (Degrees) Typical 30 30 30 30 30 30 30 Luminous Efficacy V [3] (lm/W) Typical 150 240 263 320 480 500 75
Color Red Red Orange Orange Amber Green Blue
Part Number HSMC-A43x HSMJ-A43x HSMV-A430 HSML-A431 HSMA-A43x HSMM-A430 HSMN-A43X
Dice Technology AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP InGaN InGaN
Notes: 1. The dominant wavelength, D, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, Ie in watts / steradian, may be calculated from the equation Ie = IV / V, where IV is the luminous intensity in candelas and V is the luminous efficacy in lumens / watt.
Electrical Characteristics (TA = 25 C)
Forward Voltage VF (Volts)@IF=50 mA Part Number HSMC/J/L/A HSMV Typical 2.2 2.8 Maximum 2.5 3.4 Reverse Voltage VR@100mA Minimum 5 5 Reverse Voltage VR@10mA Minimum -
Forward Voltage VF (Volts)@IF=30 mA Part Number HSMM/N Typical 3.9 Maximum 4.6
Reverse Voltage VR@100mA Minimum -
Reverse Voltage VR@10mA Minimum 5
AlInGaP Amber 1 0.8 RELATIVE INTENSITY 0.6 0.4 0.2 0 380 430 480 530 580 630 InGaN Green InGaN Blue
AlInGaP Orange AlInGaP Red Orange
AlInGaP Red
680
730
780
WAVELENGTH - nm Figure 1. Relative Intensity Vs. Wavelength
4
80 70 HSMC/J/L/A
FORWARD CURRENT - mA
HSMV
60 50 40 30 20 10 0 0 1 2 3 4 5 FORWARD VOLTAGE - V HSMM/N
Figure 2. Forward Current Vs. Forward Voltage 1.4
RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 50 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 30 mA)
1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 DC FORWARD CURRENT - mA 0 5 10 15 20 25 DC FORWARD CURRENT - mA 30 35
1.2 1.0 0.8 0.6 0.4 0.2 0
Figure 3a. Relative Intensity Vs. Forward Current (AlInGaP).
Figure 3b. Relative Intensity Vs. Forward Current (InGaN).
Figure 4a. Maximum Forward Current Vs. Ambient Temperature. Derated Based on TJmax= 110C (AlInGaP)
Figure 4b. Maximum Forward Current Vs. Ambient Temperature. Derated Based on TJmax= 110C (InGaN)
5
1 0.9 0.8 NORMALIZED INTENSITY 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 90 ANGULAR DISPLACEMENT - DEGREES Figure 5. Radiation Pattern 2.60 (0.103) 1.10 (0.043) 0.50 (0.020) 4.50 (0.178) 1.50 (0.059) Y X X 0.40 (0.016)
Y
DIMENSIONS IN mm (INCHES). Figure 6a. Recommended Soldering Pad Pattern (IR Reflow).
SOLDER RESIST
REPRESENTS ELECTRICAL CONNECTIVITY BETWEEN PADS
X 6.1 (0.240) 2.8 (0.110) Y 2.0 (0.079)
X 0.5 (0.020)
6.0 (0.236) 3.0 (0.118) 2.0 (0.079) Y 1.0 (0.039)
DIMENSIONS IN mm (INCHES). Figure 6b. Recommended Soldering Pad Pattern (TTW).
SOLDER RESIST
REPRESENTS ELECTRICAL CONNECTIVITY BETWEEN PADS
6
Figure 7. Soft Tip Vacuum Pick-up Tool for Extracting SMT LED Components from Carrier Tape.
10 to 20 SEC. 217C 255 C +5C -0C
TEMPERATURE
-6C/SEC MAX.
3C/SEC MAX. 125C +/- 25C
60-150 SEC. MAX. 120 SEC. TIME Figure 8a. Recommended SnPb Reflow Soldering Profile Figure 8b. Recommended Pb-free Reflow Soldering Profile.
Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT LED Indicator Components.
Figure 9. Recommended Wave Soldering Profile.
7
TRAILER 200 mm MIN. FOR 180 REEL. 200 mm MIN. FOR 330 REEL.
COMPONENT
LEADER 480 mm MIN. FOR 180 REEL. 960 mm MIN. FOR 330 REEL.
C
A
USER FEED DIRECTION Figure 10. Tape Leader and Trailer Dimensions
Figure 11. Tape Dimensions USER FEED DIRECTION
CATHODE SIDE
PRINTED LABEL Figure 12. Reeling Orientation.
8
Moisture Sensitivity
This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling of Moisture Sensitive Surface Mount Devices for details.
Intensity Bin Select (X5X6)
Individual reel will contain parts from one half bin only X5 X6 0 3 4 5 7 8 9 Full Distribution 3 half bins starting from X51 4 half bins starting from X51 5 half bins starting from X51 3 half bins starting from X52 4 half bins starting from X52 5 half bins starting from X52 Min Iv Bin
A. Storage before use
- Unopen moisture barrier bag (MBB) can be stored at <40C/90%RH for 12 months. If the actual shelf life has exceeded 12 months and the HIC indicates that baking is not required, then it is safe to reflow the LEDs per the original MSL rating. - It is not recommended to open the MBB prior to assembly (e.g. for IQC).
B. Control after opening the MBB
- The humidity indicator card (HIC) shall be read immediately upon opening of MBB. - The LEDs must be kept at <30C / 60%RH at all time and all high temperature related process including soldering, curing or rework need to be completed within 672 hours.
Intensity Bin Limits
Bin ID W1 W2 X1 X2 Y1 Y2 Z1 Z2 11 12 21 22 Min (mcd) 1125.00 1400.00 1800.00 2240.00 2850.00 3550.00 4500.00 5600.00 7150.00 9000.00 11250.00 14000.00 Max (mcd) 1400.00 1800.00 2240.00 2850.00 3550.00 4500.00 5600.00 7150.00 9000.00 11250.00 14000.00 18000.00
C. Control for unfinished reel
- For any unuse LEDs, they need to be stored in sealed MBB with desiccant or desiccator at <5%RH.
D. Control of assembled boards
- If the PCB soldered with the LEDs is to be subjected to other high temperature processes, the PCB need to be stored in sealed MBB with desiccant or desiccator at <5%RH to ensure no LEDs have exceeded their floor life of 672 hours.
E. Baking is required if:
- "10%" or "15%" HIC indicator turns pink. - The LEDs are exposed to condition of >30C / 60% RH at any time. - The LEDs floor life exceeded 672 hours. Recommended baking condition: 605C for 20 hours.
Tolerance of each bin limit = 12%
9
Color Bin Select (X7)
Individual reel will contain parts from 1 full bin only X7 0 Z Y W V U T S Q P N M L K 1 2 Full Distribution A and B only B and C only C and D only D and E only E and F only F and G only G and H only A, B and C only B, C and D only C, D and E only D, E and F only E, F and G only F, G and H only A, B, C and D only E, F G and H only
Green A B C D Amber A B C D E F Red Full Distribution
Min. (nm) 515.0 520.0 525.0 530.0 Min. (nm) 582.0 584.5 587.0 589.5 592.0 594.5 Min. (nm)
Max. (nm) 520.0 525.0 530.0 535.0 Max. (nm) 584.5 587.0 589.5 592.0 594.5 597.0 Max. (nm)
Tolerance of each bin limit = 1nm
Packaging Option (X8X9)
Option Max. (nm) 465.0 470.0 475.0 480.0 Max. (nm) 495.0 500.0 505.0 510.0 M1 M2 Test Current 50mA 30mA Package Type Top Mount Top Mount Reel Size 13 inch 13 inch
Color Bin Limits
Blue A B C D Cyan A B C D Min. (nm) 460.0 465.0 470.0 475.0 Min. (nm) 490.0 495.0 500.0 505.0
Forward Voltage Bin Table
For HSMV - A43x-xxxxx only Bin VA VB VC VD VE Min. 1.9 2.2 2.5 2.8 3.1 Max. 2.2 2.5 2.8 3.1 3.4
Tolerance for each bin limit = 0.1V
For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright (c) 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0313EN AV02-0208EN - August 29, 2007

▲Up To Search▲

Price & Availability of HSMC-A430-W50M1

	To Download HSMC-A430-W50M1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .